微波瑞利散射法测定空气电火花激波等离子体射流的时变电子密度

大气压空气电火花激波等离子体射流的电子密度在亚微秒时间尺度上瞬变,其电子密度的测定很难.基于微波瑞利散射原理,本文测量了空气电火花冲击波流注放电等离子体射流的时变电子密度.实验结果表明:测量系统的标定参数A为1.04 × 105 V·Ω·m–2;空气流注放电等离子体射流的电子密度与等离子体射流的半径和长度有关,结合高速放电影像展示的等离子体射流的等效半径和等效长度,测定的电子密度在1020 m–3的量级,且随时间先快速增长至峰值再成指数衰减.此外,本文还探讨了等离子体射流的不同等效尺度对测定结果的影响;分析结果表明,采用时变等效半径和时变等效长度的计算结果最有效,且第1个快速波峰是由光电离的电离波导致的.     

Investigation of β-Ga_2O_3 films and β-Ga_2O_3/GaN heterostructures grown by metal organic chemical vapor deposition

In this work,(-201) β-Ga_2O_3 films are grown on GaN substrate by metal organic chemical vapor deposition(MOCVD). It is revealed that the β-Ga_2O_3 film grown on GaN possesses superior crystal quality, material homogeneity and surface morphology than the results of common heteroepitaxial β-Ga_2O_3 film based on sapphire substrate. Further, the relevance between the crystal quality of epitaxial β-Ga_2O_3 film and the β-Ga_2O_3/GaN interface behavior is investigated. Transmission electron microscopy result indicates that the interface atom refactoring phenomenon is beneficial to relieve the mismatch strain and improve the crystal quality of subsequent β-Ga_2O_3 film. Moreover, the energy band structure of β-Ga_2O_3/GaN heterostructure grown by MOCVD is investigated by X-ray photoelectron spectroscopy and a large conduction band offset of 0.89 eV is obtained. The results in this work not only convincingly demonstrate the advantages of β-Ga_2O_3 films grown on GaN substrate, but also show the great application potential of MOCVD β-Ga_2O_3/GaN heterostructures in microelectronic applications.     

On the Generalized Porous Medium Equation in Fourier-Besov Spaces

We study a kind of generalized porous medium equation with fractional Laplacian and abstract pressure term. For a large class of equations corresponding to the form: $u_t+\nu \Lambda^{\beta}u=\nabla\cdot(u\nabla Pu)$, we get their local well-posedness in Fourier-Besov spaces for large initial data. If the initial data is small, then the solution becomes global. Furthermore, we prove a blowup criterion for the solutions.     

交错跃迁Hofstadter梯子的量子流相

为玻色Hofstadter梯子模型引入交错跃迁,来扩展模型支持的量子流相.基于精确对角化和密度矩阵重整化群计算发现,无相互作用时,系统中包含横流相、涡旋相和纵流相;横流相来自均匀跃迁时Hofstadter梯子模型的Meissner相,纵流相是交错跃迁时才可见的流相.强相互作用极限下系统的超流区也包含横流相、纵流相和涡旋相,但存在更多的相变级数;超流区的横流相、纵流相之间存在相变但Mott区的不存在,把Mott区的"横、纵流相"称为Mott-均匀相,在Mott区只存在均匀相和涡旋相.跃迁的交错会压缩涡旋相存在的区域,使Mott区最终只剩下均匀相;跃迁的交错不仅能驱动Mott-超流相变,还使磁通的改变也能够驱动系统的Mott-超流相变.对这一系统的研究丰富了磁通系统中的量子流相,同时为研究拓扑流特性提供了模型支持.     

A colorimetric sensing strategy based on enzyme@metal-organic framework and oxidase-like IrO2/MnO2 nanocomposite for α-glucosidase inhibitor screening

Microchimica Acta - Testing gluten content in food, before it reaches the consumer, becomes a major challenge where cross-contamination during processing and transportation is a very common...     

一种非正交对称条带束流位置监测器设计

介绍了一种条带束流位置监测器(BPM)的设计与仿真方法。在国家同步辐射实验室"太赫兹近场高通量材料物性测试系统"工程项目中,针对波荡器出口处真空室非正交对称性的问题,设计了矩形真空室和跑道形真空室下的两种非正交对称性条带BPM,并与传统的圆形真空室下条带BPM进行对比。基于边界元法,利用MATLAB软件分别对三种真空室下的条带BPM进行建模和仿真。仿真结果表明:相对于传统的圆形真空室下条带BPM,矩形和跑道形真空室下条带BPM灵敏度提高了30%,阻抗匹配误差相对降低了20%,束流位置拟合误差降低了80%。考虑加工精度,矩形真空室下的条带BPM更适用于该工程。     

空中目标多波段红外辐射特性描述与仿真分析

针对空中目标在复杂背景下的探测需求,根据实际目标的运动特性,分析目标在飞行高度、飞行姿态角改变时的辐射特点,基于MODTRAN计算得到大气辐射和衰减数据,建立目标的三维模型、热辐射和反射模型,搭建空中目标的红外成像仿真系统.分析和仿真结果表明:在中波波段,目标尾焰的红外辐射比蒙皮强很多,在长波波段,蒙皮的红外辐射比较强,仿真图像的细节比较多,尾焰的红外辐射虽然有所减弱,红外成像效果依旧很好;相同探测条件下,由于位置越高大气越稀薄,探测器的可探测距离会变得比较远.目标红外辐射特性的分析和红外仿真系统的搭建对缩短红外探测器的研制周期和进一步确定探测器波段和系统分辨率等指标提供了参考依据.     

Improved Effect of Water-Soluble Binder NV-1A on the Electrochemical Proprieties LFP Electrodes

Russian Journal of Electrochemistry - The electrochemical properties of batteries consist of LiFePO4 (LFP) with the NV-1A binder were studied in depth. It was shown that SEI layer for NV-1A formed...     

Nonlinear vibration effects on the fatigue life of fluid-conveying pipes composed of axially functionally graded materials

Nonlinear Dynamics - Fatigue is inevitable in pipes conveying fluid due to unwanted vibration. Internal resonance occurs in such pipes due to pre-pressure. For the first time, the effects of...     

Ti0.33WO3电子结构和太阳辐射屏蔽性能第一性原理研究

节能减排已成为当今社会发展的主题,对节约能源、提高太阳能的高效综合利用的新型窗用透明隔热材料的理论设计和研究尤其重要.本文采用基于密度泛函理论的计算方法,研究了六方相三氧化钨Ti掺杂前、后的晶格参数、电子能带结构、形成能和光学性质.研究结果表明,Ti掺杂后晶格体积增大,系统能量降为负值,体系具有更好的稳定性;掺杂后电子能带结构发生很大的变化,但材料仍保持n型电导率;随之,其光学性质也发生改变,掺杂前h-WO3无近红外吸收性能,掺杂后的Ti0.33WO3具有很强的近红外吸收性能.在此基础上研究了Ti掺杂h-WO3前、后的太阳辐射屏蔽性能,掺杂前无太阳辐射屏蔽性能;掺杂后的Ti0.33WO3薄膜具有可见光高透明、近红外屏蔽的性能.计算结果为Ti掺杂h-WO3在窗用透明隔热材料方面的研究提供了理论依据.